Attributes
|
Networking Interfaces
|
8 10/100/1000M M12 Copper ports.
2 1000M DH24 LC Fiber ports.
|
Management Interface
|
M12 Console port
|
LED Indicators
|
Power, Link/Act, PoE
|
Connectors
|
Copper ports
|
M12 8-pole A-coded
|
Fiber ports
|
DH-24 waterproof connectors (LC)
|
Console port
|
M12 4-pole D-coded
|
Power port
|
M12 5-pole A-coded
|
Copper Cable
|
10Base-T
|
2-pair UTP/STP Cat. 3,4,5/5E,6 cable EIA/TIA-568 100-ohm (100m)
|
100Base-T
|
2-pair UTP/STP Cat. 5/5E,6 cable EIA/TIA-568 100-ohm (100m)
|
1000Base-T
|
4-pair UTP/STP Cat. 5E,6 cable EIA/TIA-568 100-ohm (100m)
|
Optical Cable
|
Multi-mode
|
50/125um~62.5/125um
|
Single-mode
|
9/125um
|
Performance
|
Switching Capacity
|
20 Gbps
|
Forwarding Capacity
|
14.88 Mpps
|
Forwarding Mode
|
Store and Forward
|
Packet Buffer Memory
|
4.1 Mbit
|
RAM for CPU
|
256 Mbit
|
Flash Memory
|
32 Mbit
|
MAC Address Table
|
8K
|
Max. Jumbo Frame size
|
16K
|
VLAN Quantity
|
4K
|
ACL Table
|
512
|
L3 Interface
|
32
|
Port Queues
|
8
|
PoE Budget
|
120W
|
Physical
|
Dimensions
|
200*110*90mm
|
Weight
|
|
Operating Temperature
|
-40 to 75℃
|
Storage Temperature
|
-40 to 85℃
|
Operating Humidity
|
5 to 95% Noncondensing
|
Power Method
|
44-57VDC
|
Max. Power Consumption
|
Including PoE Output: 135W
Excluding PoE Output: 15W
|
EMC Safety
|
FCC, CE, RoHS
|
Reliability
|
200,000Hours
|
Power over Ethernet
|
PoE Interfaces
|
Ports 1-8
|
PoE Standard
|
IEEE802.3af, IEEE802.3at
|
Max. PoE Wattage per Port
|
30W
|
PoE Voltage
|
52VDC (Depend on Power Adapter)
|
PoE Pin Assignment
|
V- (RJ45 Pin1,2), V+ (RJ45 Pin 3,6)
|
PoE Management
|
Port-base PoE status view and control
|
Port Configuration
|
Enable and Disable
|
Support control enable and disable
|
Auto-Negotiation
|
Support force port mode and speed
|
Flow Control
|
Support IEEE802.3x full-duplex
Support half-duplex backpressure
|
Storm Control
|
Support broadcast, multicast and DLF package rate limit
|
Port Mirroring
|
Support many to one mirroring
|
Rate Limit
|
Support Port input and output rate limit
|
Link Aggregation
|
Support manual Link Aggregation
Support LACP
Up to 8 maximum aggregation groups, each containing up to 8 ports
|
Aggregation Strategy
|
Source MAC / Destination MAC / Source Destination MAC
Source IP / Destination IP / Source Destination IP
|
Port Protection
|
Each port can be configured into isolated protected port from each other
|
MAC Configuration
|
MAC Address Table Management
|
Support
|
Transfer Mode
|
Support IVL transfer mode
|
Static MAC Address
|
Support
|
MAC Binding
|
Support
|
MAC Address Filter
|
Support
|
MAC Quantity Limitation
|
Support limit the number of MAC-addresses Learning per port
|
VLAN Configuration
|
VLAN Based on 802.1Q
|
Support
|
MAC-Based VLAN
|
Support
|
IP-Based VLAN
|
Support
|
Protocol-Based VLAN
|
Support
|
Voice VLAN
|
Support
|
Guest VLAN
|
Support
|
Private VLAN
|
Support
|
VLAN Mapping
|
Support 1:1 mapping
|
Double VLAN Markup
|
Support basic QinQ
|
Reliability Protocol
|
Spanning Tree
|
Support STP/RSTP/MSTP
|
BPDU Guard
|
Support
|
BPDU Filter
|
Support
|
Port Loop Detection
|
Support
|
EAPS Protocol
|
Support RFC3619
|
LLDP Protocol
|
Support LLDP and LLDP-MED
|
UDLD Protocol
|
Totally compatible with UDLD protocol of CISCO
|
Host Routing
|
Static ARP
|
Support
|
Static Routing
|
Support
|
Multicast
|
Static Multicast MAC Address
|
Support
|
IGMP SNOOPING
|
Support
|
MVR
|
Support
|
GMRP
|
Support
|
Access Control List (ACL)
|
Based on Standard IP
|
Support
|
Based on Extend IP
|
Support
|
Based on MAC IP
|
Support
|
Based on MAC ARP
|
Support
|
Based on time
|
Support
|
Port Filtering
|
Support
|
Quality of Service (QOS)
|
Scheduling Mode
|
Support WRR, SP, WFQ
|
Sorting Based on Port
|
Support
|
Sorting Based on 802.1p
|
Support
|
Sorting Based on DSCP(DiffServ)
|
Support
|
Sorting Based on ACL Data Flow
|
Support
|
QoS Strategy
|
Support packet mapped to the corresponding output queue
Support to modify the packet’s COS and DSCP sign
Support limit of data flow
Support statistics of data flow
Support mirroring of data flow
|
Security
|
Administrative Security
|
Support start and end TELNET, WEB and SNMP serve
Support TELNET, WEB and SNMP serve binding with Standard IP ACL
Support control the number of user for TELNET
|
CPU Protect
|
Switch self-security protect, forbid flow attack
|
IP-MAC Address Binding
|
Support binding between static configuration IP, MAC and Port
|
AAA
|
Support 802.1x protocol
Support RADIUS protocol
Support RADIUS server authentication authorization and bill
Support MAC-based 802.1X authentication.
Support 802.1x guest VLAN
|
DHCP SNOOPING
|
Support dynamic ARP binding to prevent ARP spoofing
Support dynamic IP, MAC port binding
Support stationary port connect to DHCP server, to prevent privately connect to DHCP sever
|
Prevent ARP Spoofing
|
Support manual configure ACL rule based on MAC ARP prevent ARP spoofing
Support DHCP SNOOPING function, switch dynamically binding ARP and port, when the DHCP get IP address , to prevent ARP spoofing
|
Management Feature
|
CLI Management
|
Support serial port management
Support TELNET management
Support SSH management
|
WEB Management
|
Support
|
SNMP Management
|
Support SNMP protocol
Support SNMP TRAP
Support standard and private MIB
|
User management
|
Support multi-user management
|
Show CPU Utilization
|
Support
|
Show RAM Utilization
|
Support
|
Log Management
|
Support
|
RMON
|
Support RMON 1,2,3,9 group
|
Configuration Download / Upload
|
Support
|
Upgrade Firmware
|
Support
|
Timer Management
|
Support local timer management
Support SNTP protocol get clock
|
Debugging Tools
|
PING
|
Support
|
TRACEROUTE
|
Support
|
TELNET Client
|
Support
|
Package List
|
PoE Switch
|
1pcs
|
User Manual
|
1pcs
|
DB9 to M12 Cable
|
1pcs
|