Item
|
Description
|
Summarize
|
Fixed port
|
8 10/100/1000Base-TX ports.
2 Gigabit SFP ports.
1 Console port.
|
LED Indicators
|
PWR, PoE and Link/Act LED.
|
Input voltage
|
100V~240V AC,50/60Hz (for power adapter)
44~57VDC (for PoE switch)
|
Network Media
|
10BASE-TX: UTP category 5, 5e cable (≤250m)
100BASE-TX: UTP category 5, 5e cable (≤150m)
1000BASE-TX: UTP category 5, 5e cable (≤150m)
|
Forwarding Rate
|
10BASE-T: 14880pps / port
100BASE-TX: 148800pps / port
1000BASE-TX: 1488000pps / port
|
Power Supplies
|
65W (55W for PoE)
135W (125W for PoE)
|
Operating temperature
|
0℃~40℃.
|
Storage temperature
|
-10℃~70℃.
|
Relative humidity
|
20%~85% (non-condensing).
|
PoE
|
PoE port
|
4/8 10/100/1000Base-TX ports.
|
PoE Standard
|
IEEE802.3af, IEEE802.3at, per port Max 30W
|
Pin assignment
|
V- (RJ45 Pin 1, 2), V+ (RJ45 Pin 3, 6).
|
PoE management
|
Support Port-base PoE status view and control.
|
Port configuration
|
Enable and disable
|
Support
|
Port Auto-Negotiation
|
Support force port mode and speed
|
Flow control
|
Support IEEE 802.3x full-duplex flow control
Support half-duplex backpressure flow control
|
Support Broadcast storm filter
|
Support broadcast,multicast
and DLF package rate limit
|
Broadcast storm filter
|
Support respectively testing the port’s broadcast packets, multicast and unicast packets, and close the port when exceeds the valve-value
|
Port Mirroring
|
Support
|
Port rate limit
|
Support Port input and output rate limit
|
Link Aggregation
|
Support manual Link Aggregation
Support LACP
Up to 8 maximum aggregation groups, each containing up to 8 ports
Support Source MAC, Destination MAC, Source Destination MAC, Source IP, Destination IP, Source Destination IP routing strategy
|
Port Protection
|
Each port can be configured into isolated protected port from each other
|
Jumbo Frame
|
Support, Jumbo packets up to 10K bytes.
|
Testing of cable distance
|
Support
|
MAC configuration
|
MAC address table
|
8K
|
MAC address table management
|
Support
|
Transfer Mode
|
Support IVL transfer mode
|
Static MAC address
|
Support
|
MAC binding
|
Support
|
MAC Address filter
|
Support
|
MAC Address Learning control
|
Limit the number of MAC-addresses Learning per port.
|
VLAN configuration
|
VLAN quantity
|
4K
|
VLAN based on 802.1q
|
Support
|
MAC-based VLAN
|
Support
|
IP-based VLAN
|
Support
|
VLAN based on protocol
|
Support
|
Voice VLAN
|
Support
|
VLAN mapping
|
Support 1:1 mapping
|
Double VLAN markup
|
Support basic QinQ
Support flexible QinQ
|
Reliability protocol
|
Spanning Tree
|
IEEE802.1d STP
IEEE802.1w RSTP
IEEE802.1s MSTP
|
Ring Protocol
|
Support
|
EAPS protocol
|
Support RFC3619
|
ERPS protocol
|
Support G.8032/Y.1344
|
LLDP protocol
|
Support LLDP and LLDP-MED
|
UDLD protocol
|
Totally compatible with UDLD protocol of CISCO
|
Host routing
|
Static ARP
|
Support
|
Static Routing
|
Support
|
L3 VLAN interface
|
Up to 32 L3 VLAN Interface.
|
Multicast function and protocol
|
Static Multicast MAC Address
|
Support
|
IGMP SNOOPING
|
Support
|
MVR
|
Support
|
GMRP protocol
|
Support
|
ACL
|
ACL based on Standard IP
|
Support
|
ACL based on Extend IP
|
Support
|
ACL based on MAC IP
|
Support
|
ACL based on MAC ARP
|
Support
|
ACL port filtering
|
Support
|
ACL based on time
|
Support
|
QoS
|
Member of port queues
|
8
|
Scheduling mode of port queues
|
Support WRR,SP,WFQ scheduling mode
|
Sorting based on port
|
Support
|
Sorting based on 802.1p
|
Support
|
Sorting based on DSCP (Diff-Serv)
|
Support
|
Sorting based on ACL data flow
|
Support
|
QoS strategy
|
Support packet mapped to the corresponding output queue
Support to modify the packet’s COS and DSCP sign
Support limit of data flow
Support statistics of data flow
Support mirroring of data flow
|
IPv6
|
ICMPv6
|
Support
|
IPv6 Neighbor Discovery
|
Support
|
MLD Snooping
|
Support
|
IPv6 Telnet
|
Support
|
Management feature
|
CLI management
|
Support serial port management
Support TELNET management (IPv6 ready)
Support SSH management
|
WEB management
|
Support
|
SNMP management
|
Support SNMP protocol
Support SNMP TRAP
Support standard and private MIB
|
User management
|
Support multi-user management
|
TACACS+
|
Support TACACS+ server remote user name and password authentication
Support PAP and CHAP password encryption
Support TACACS+ server command authorization
|
Log management
|
Support local log management
Support SYSLOG
|
RMON
|
Support RMON 1,2,3,9 group
|
Cluster management
|
Support neighbor discovery protocol
Support topology discovery protocol
Support manual and automated join cluster group
Support cluster unification management
|
OAM
|
Support 802.3ah
Support 802.1ag
|
Configuration File Download/Upload
|
Support
|
Upgrade Firmware
|
Support
|
Timer management
|
Support local timer management
Support SNTP protocol get clock
|
Security feature
|
Administrative Security
|
Support start and end TELNET、WEB and SNMP serve
Support TELNET、WEB and SNMP serve binding with Standard IP ACL
Support control the number of user for TELNET
|
CPU protect
|
Switch self-security protect, forbid flow attack
|
AAA
|
Support 802.1x protocol
Support RADIUS protocol
Support RADIUS server authentication authorization and bill
Support MAC-based 802.1X authentication.
Support 802.1x guest VLAN
|
IP-MAC address binding
|
Support binding between static configuration IP,MAC and port
|
DHCP SNOOPING
|
Support dynamic ARP binding to prevent ARP spoofing
Support dynamic IP,MAC port binding
Support stationary port connect to DHCP server to prevent privately connect to DHCP sever
|
Prevent ARP spoofing
|
Support manual configure ACL rule based on MAC ARP prevent ARP spoofing
Support DHCP SNOOPING function switch dynamically binding ARP and port ,when the DHCP get IP address , to prevent ARP spoofing
|
Debugging tools
|
PING
|
Support
|
TRACEROUTE
|
Support
|
TELNET client
|
Support
|
Package
|
Unit Size
|
205*122*33.5cm
|
package
|
Carton Box
|
Package
|
Switch
User Manual
Power Cord*1
Rubber Feet*4
|