undefined
+
  • undefined

S7754 48 10G+4 40G SDN Network Switch

Applied to rail transit, expressway, power station, pipe gallery project and wireless wiring project

Category:

Key words: switch

Messages
  • Describe
  • Specifications
  • Application
  • Order Information
  • Documentation
  • Download
  • ● 48 SFP+ ports, supporting 10G (10GBASE-DAC, 10GBASE-SR/LR) or 1GbE (1000BASE-T /SX/LX);

    ● 6 40QSFP+ ports, supporting 40G (40GBASE-DAC, 40GBASE-SR4/LR4) or 4x10G(40G-to-10G copper or fiber split);

    ● Exchange capacity of 1.44Tbps;

    ● Standard 1U TOR switch;

    ● AC dual power module, redundant design that supports hot swap;

    ● 4+1 redundant fan design with hot-swappable fan modules;

    ● Can be installed in a 19-inch standard cabinet or a 21-inch OCP cabinet;

    ● All service ports are concentrated on the front panel to get a convenient service maintenance;

    ● Front-to-back airflow direction, efficient hot and cold air duct design;

    ● Manage the switch through the copper port and the console port.

    ● eUSB SSD storage port, support SSD storage expansion;

  • Physical port

    48 10G SFP+ ports, support 10G or 1G

    6 QSFP+ 40G ports

    1 RJ45 Console port

    1 RJ45 Ethernet management port

    1 USB A type storage port

    Main components

    Switch chip: Broadcom Trident 2+

    CPU module: Intel 4 core 2.4GHZ x86 processor

    8GB SO-DIMM DDR3 RAM

    8GB eUSB SSD

    8MB Serial Flash Memory

    performance

    Line speed forwarding: L2/L3

    Exchange capacity: 1.44Tbps

    Forwarding rate: 1071Mpps

    Jumbo frames support up to 9192 Bytes

    Fiber and copper cables supported

    SFP+ port: 10GBASE-CR DAC

    10GBASE-SR

    10GBASE-LR

    QSFP+ port

    40GBASE-CR4 DAC

    40GBASE-SR4

    40GBASE-LR4 40GBASE-CR4 DAC to 4xSFP+10GBASE-CR DAC

    40GBASE-LR4 to 4xSFP+10GBASE-LR

    40GBASE-SR4 to 4xSFP+10GBASE-SR

    Hardware specifications

    Dimensions (length x width x height): 44.2x47.3x4.4cm

    Overall weight: 8.96 Kg (including 2 PSUs)

    Input voltage: AC110V/220V 50/60HZ

    Input current: 3A@200/240VAC

    Power efficiency: 93%

    PSUs : AC total two, 300W / piece

    Power: 260W

    High reliability

    Two AC power modules for load balancing, hot swap

    5 fan modules, 4+1 redundancy backup, support hot swap;

    Operating temperature: -5 °C ~ 50 °C.

    Non-operating temperature: -40 °C ~ 85 °C.

    Operating humidity: 10% ~ 90% (no condensation)

    LEDs indicator

    SFP+ port LED: Use the same light to indicate Act, Link

    QSFP+ port LED: Use the same light to indicate Act, Link

    Ethernet management port: Link Led, Act Led

    Management LED: Ps1, Ps2, Diag, Fan, Loc, Sys

    Software Pre-install: Open Network Install environment (ONIE) program installer and Open-switch open source network operating system

    Guideline

    A, EMC standard:

    EN55022 Class A

    FCC Part15 Class A

    EN61000-3-2

    EN61000-3-3 ( flicker)

    GB9524-2008

    B, safety standard:

    CCC (GB4943.1)

    Basic configuration management features

    Support CLI management

    Support Login through console and SSH terminal

    Support version upgrade

    Support NTP clock synchronization

    Support sFlow

    Support mirror

    SDN/OpenFlow feature

    Support OpenFlow standard

    Support multi-controller

    Support controller type: DCFabric, RYU, ODL

    Support OVSDB

    Support multi-level flow table
    Support Meter

    Support Qos

    Support NAT

  • S7754

    24 Ports 10G SDN Switch with 4 40G QSFP+ Data Center Switch


Next

*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible