S6054-P-RPS 48 Ports L3 Managed 2.5G POE Switch with 4x25G SFP28 and 2x40G QSFP28 Uplink Ports
Applied to rail transit, expressway, power station, pipe gallery project and wireless wiring project
Category:
Key words: switch
Messages- Describe
- Specifications
- Application
- Order Information
- Documentation
- Download
-
Product Description：
The S6054-P-RPS is a 1U rack mount Layer3 switch and support IEEE802.3af/at PoE with PoE power budget of 400W / 720W / 800W / 1440W to deliver clean power to powered devices such as Voice-over-IP (VoIP) phones, wireless access points (APs), video surveillance cameras. Easy deployment for SMB, enterprise, and campus, S6054-P-RPS has 48x2.5G ports to offer higher speed for end devices, e.g. Wi-Fi 6 with existing installed CAT 5 or CAT 6 cables.
Product Features:
- IEEE802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3bz, IEEE802.3ae, IEEE802.3by, IEEE802.3ba
- IEEE802.3af, IEEE802.3at
- Provides 48x100/1000/2500BASE-T + 4x25G SFP28 + 2x40G QSFP28
- Provides 48xPoE injector, power budget 1xPSU 400W / 720W, 2xPSU 800W / 1440W
- Support redundant power supply, 600W / 920W
- High back-plane bandwidth 600Gbps
- Support MLD Snooping
- Support standard IP / Extend IP / MAC IP / ARP ACL
- Support IGMP snooping for Multi-media application
- Support Port mirror and bandwidth control
- Support IEEE802.3x Flow control
- Support Port Based VLAN / 802.1Q Tag VLAN
- Support IEEE802.3ad Port trunk with LACP
- Support Spanning tree protocol IEEE802.1d/802.1w/802.1s
- Support IEEE 802.1p class of service
- Support IEEE 802.1x user authentication
- Support Broadcast storm filter
- Support DHCP client, DHCP relay, DHCP server, DHCP snooping
- Support Static Route, Policy Route, RIP, OSPF, VRRP
- Support System event log
- Support command line interface management
- Management by Web / SNMP / SSH / Telnet / Console
-
Product Specifications:
Attributes
Networking Interfaces
48x100/1000/2500BASE-T
4x25G SFP28
2x40G QSFP28
Management Interface
Console
LED Indicators
Power, Link/Act, PoE
Performance
Switching Capacity
600 Gbps
Forwarding Capacity
446.4 Mpps
Forwarding Mode
Store and Forward
Packet Buffer Memory
32 Mbit
RAM for CPU
8 Gbit
Flash Memory
512 Mbit
MAC Address Table
32K
Max. Jumbo Frame size
12K Byte
ACL Table
3K
VLAN Quantity
4K
VLAN Interface
4K
Routing Host
16K
Routing Entries
16K
Port Queues
8
PoE Budget
1xPSU: 400W / 720W
2xPSU: 800W /1440W
Physical
Dimensions
440 x 350 x 44 mm
Weight
Operating Temperature
0 to 40℃
Storage Temperature
-10 to 70℃
Operating Humidity
5 to 95% Noncondensing
Power Method
100-240VAC, 50/60Hz
Max. Power Consumption
200W (no PoE load)
EMC Safety
FCC, CE, RoHS
Reliability
Power over Ethernet
PoE Interfaces
Ports 1-48
PoE Standard
IEEE802.3af, IEEE802.3at
Max. PoE Wattage per Port
30W
PoE Voltage
54VDC
PoE Pin Assignment
V- (RJ45 Pin1,2), V+ (RJ45 Pin 3,6)
PoE Management
Port-base PoE status view and control
Port Configuration
Enable and Disable
Support control enable and disable
Auto-Negotiation
Support force port mode and speed
Flow Control
Support IEEE802.3x full-duplex
Support half-duplex backpressure
Storm Control
Support broadcast, multicast and DLF package rate limit
Port Mirroring
Support many to one mirroring
Rate Limit
Support Port input and output rate limit
Link Aggregation
Support manual Link Aggregation
Support LACP
Up to 8 maximum aggregation groups, each containing up to 8 ports
Aggregation Strategy
Source MAC / Destination MAC / Source Destination MAC
Source IP / Destination IP / Source Destination IP
Port Protection
Each port can be configured into isolated protected port from each other
MAC Configuration
MAC Address Table Management
Support
Transfer Mode
Support IVL transfer mode
Static MAC Address
Support
MAC Binding
Support
MAC Address Filter
Support
MAC Quantity Limitation
Support limit the number of MAC-addresses Learning per port
VLAN Configuration
VLAN Based on 802.1Q
Support
MAC-Based VLAN
Support
IP-Based VLAN
Support
Protocol-Based VLAN
Support
Guest VLAN
Support
Private VLAN
Support
Reliability Protocol
Spanning Tree
Support STP/RSTP/MSTP
BPDU Guard
Support
BPDU Filter
Support
Port Loop Detection
Support
EAPS Protocol
Support RFC3619
LLDP Protocol
Support LLDP and LLDP-MED
UDLD Protocol
Totally compatible with UDLD protocol of CISCO
L3 Routing
Static ARP & Dynamic ARP
Support
Static Routing
Support
Policy Routing
Support
RIP
Support RIP v1/v2
OSPF
Support OSPF v2
VRRP
Support
Multicast
Static Multicast MAC Address
Support
IGMP SNOOPING
Support
IGMP Querier
Support
IGMP Filter
Support
MVR
Support
GMRP
Support
Access Control List (ACL)
Based on Standard IP
Support
Based on Extend IP
Support
Based on MAC IP
Support
Based on MAC ARP
Support
Based on time
Support
Port Filtering
Support
Quality of Service (QOS)
Scheduling Mode
Support WRR, SP, WFQ
Sorting Based on Port
Support
Sorting Based on 802.1p
Support
Sorting Based on DSCP(DiffServ)
Support
DHCP
DHCP Client
Support
DHCP Relay
Support
DHCP Server
Support
DHCP option 82
Support
DHCP Snooping
Support
Security
Administrative Security
Support start and end TELNET, WEB and SNMP serve
Support TELNET, WEB and SNMP serve binding with Standard IP ACL
Support control the number of user for TELNET
CPU Protect
Switch self-security protect, forbid flow attack
IP-MAC Address Binding
Support binding between static configuration IP, MAC and Port
AAA
Support 802.1x protocol
Support RADIUS protocol
Support RADIUS server authentication authorization and bill
Support MAC-based 802.1X authentication.
Support 802.1x guest VLAN
DHCP SNOOPING
Support dynamic ARP binding to prevent ARP spoofing
Support dynamic IP, MAC port binding
Support stationary port connect to DHCP server, to prevent privately connect to DHCP sever
Prevent ARP Spoofing
Support manual configure ACL rule based on MAC ARP prevent ARP spoofing
Support DHCP SNOOPING function, switch dynamically binding ARP and port, when the DHCP get IP address , to prevent ARP spoofing
Management Feature
CLI Management
Support serial port management
Support TELNET management
Support SSH management
WEB Management
Support
SNMP Management
Support SNMP protocol
Support SNMP TRAP
Support standard and private MIB
User management
Support multi-user management
Show CPU Utilization
Support
Show RAM Utilization
Support
Log Management
Support
Configuration Download / Upload
Support
Upgrade Firmware
Support
Timer Management
Support local timer management
Support SNTP protocol get clock
Debugging Tools
PING
Support
TRACEROUTE
Support
TELNET Client
Support
Package List
Switch
1pcs
User Manual
1pcs
Power Cord
1pcs
DB9 to RJ45 Cable
1pcs
Rack Mount Kit
2pcs
Rubber Feet
4pcs
-
Order Information:
Switch Models
S6054-48P-RPS
48x2.5G RJ45 + 4x25G SFP28 + 2x40G QSFP28 L3 Managed Switch with 48 PoE
Power Supply
RPS0600-AN
600W PoE Redundant Power Module
RPS0920-AN
920W PoE Redundant Power Module
Previous
Related Products
*Note: Please fill in the information accurately and keep the communication unblocked. We will contact you as soon as possible
Follow us
© Copyright 2023 Hi-Net