Home page

HN-OAP300 802.11b/g/n 2.4G 300M Rainproof outdoor thin AP

Applied to rail transit, expressway, power station, pipe gallery project and wireless wiring project

Category:

Industrial Wireless Access Point

Key words: switch

Messages

Describe
Specifications
Application
Order Information
Documentation
Download

Product Specification：

HN-OAP300 is a rainproof wireless access point (AP) product launched by Shenzhen Hi-Net Technology Company, used for outdoor scenes such as villages, schools, squares, and driving schools. It supports two spatial stream technologies. This AP uses 2T2R 2.4G wireless MIMO technology and supports a maximum transmission rate of 300Mbps.

HN-CAP300 fully considers important factors such as wireless network security, radio frequency control, mobile access, service quality assurance, seamless roaming, etc. Use together with wireless controllers which produced by Shenzhen Hi-Net Technology Company, could meet the needs of wireless users for safe, efficient and convenient access to the network.

HN-CAP300 adopts the industrial high-grade ASA engineering plastic shell, with IP65 dust-proof, waterproof, and pole-mounted appearance design.

HN-OAP300 supports 4kV lightning protection, 15kV ESD protection, and PoE power reception to ensure the safety and stability of the product when used outdoors.

HN-OAP300 adopts an external PA design, with a transmission power of up to 400mW, a built-in high-gain dual-polarized directional antenna, and the horizontal and vertical coverage angles are both 70 degrees. According to actual measurements, the effective coverage distance can reach 100 meters away from the radius.

Product Features：

IEEE 802.3 10Base-T、IEEE 802.3u 100Base-TX，IEEE802.3af, IEEE802.3at

IEEE802.11 b，IEEE 802.11g，IEEE 802.11n

Wireless rate：300Mbps

Built-in 2.4GHz 2X2 MIMO directional antenna, antenna gain up to 6dBi

Optional 8dB, 12dB omnidirectional glass fiber reinforced plastic antenna or 14dB sector antenna

Built-in standard PoE power supply module design

Wireless network security support includes WEP, WPA, WPA2 encryption

Provide wireless client access restriction function

Provide 8 SSID

Support Chinese SSID

Support VLAN and SSID binding to ensure data security

Rich service quality assurance（QoS）

Support Hi-net wireless controller management

Local management and maintenance

Support 12V DC power supply or POE power supply

Operating Temperature：-30〜55℃

4kV lightning protection, 15kV ESD protection

IP65 ASA engineering plastic shell

MTBF200,000 hours

Warranty：2 years

Product Specifications:

Attributes
Model	HN-OAP300
wireless technology	2.4G:300M 802.11b/g/n 2*2MIMO
Operating mode	Fit AP
RAM	64MB DDR2 RAM
Flash	8MB Flash
Working frequency	802.11b/g/n ：2.4G ~ 2.483GHz (The working frequency band varies according to the configuration of different countries）
Transmission rate	300Mbps
Transmit power	≤400mW(The actual transmit power varies according to the laws and regulations of different countries and regions)
Spatial flow	2 streams
Modulation	OFDM=BPSK,QPSK,16-QAM,64-QAM;DSSS=DBPSK,DQPSK,CCK
Receiving sensitivity	11b：-91dBm(1Mbps)，-88dBm(5Mbps)，-85dBm(11Mbps) 11g：-89dBm（6Mbps），-80dBm（24Mbps），-76dBm（36Mbps），-71dBm（54Mbps） 11n：-83dBm@MCS0，-65dBm@MCS7，-83dBm@MCS8，-65dBm@MCS15
Antenna	Built-in 6dBi high gain antenna Optional 8dB, 12dB omnidirectional fiberglass antenna or 14dB sector antenna
Coverage	100M
Wireless coverage angle	horizontal direction：70° Vertical direction: 30°
Networking Interfaces	2x10/100Base-T Ethernet ports，WAN/PoE port support PoE power supply
Operating Temperature	Temperature：-30℃～+55℃（Operating），Humidity（Non-condensing）：10％～90％（Operating），
Storage Temperature	Temperature：-40℃ ～+70℃（storage），Humidity（Non-condensing）5％～95％（storage）
Power Method	POE power supply
Power consumption	＜13W
Dimensions	2628857(mm）
Weight	1.3Kg
Installation method	Pole installation
Performance
wireless function	SSID broadcast/hide Number of SSID: 8 (support Chinese SSID) Wireless encryption: WPA-PSK, WPA2-PSK User isolation: isolation between wireless networks, isolation within APs Limit on the number of wireless clients Broadcast optimization Automatic channel selection Transmit power adjustment RSSI restrictions Eliminate weak signal equipment User limit
Maximum number of clients that can be associated	30/60/100
System Management	Centralized management through AC, configuration issuance AP log reset software upgrade AP restart
Other functions	Short Guard Interval DTIM interval setting Beacon interval setting RTS threshold setting Wireless user status display
Packing list
Wireless AP	1piece
User manual	1piece
Warranty card	1piece

Model

HN-OAP300

802.11b/g/n 2.4G 300M Outdoor thin AP

None