Download

Language

Nickname | quit

Recently added:

in total 0 items Total 0

Home page

RPS3010-8P

8-port Gigabit waterproof Layer 3 PoE switch with 2 Gigabit uplink ports

Ports Type ：

Fiber Port,Copper Port

Uplink Ports ：

1G SFP

Downlink Ports ：

1G RJ45

Port Count ：

8 Ports

Management ：

Web UI

PoE Type ：

PoE(802.3af),PoE+(802.3at)

¥ 0

Quantity

Add to cart

Buy now

Overview

Hardware Features

Firmware Features

Applications

Order Information

Download

The RPS3010-P is a three-layer managed weatherproof PoE switch designed for outdoor APs, IPC products, etc. The RPS3010-P supports eight 10/100/1000M PoE ports and two 1G SFP uplink ports. Based on Power over Ethernet technology, it can provide data and power to end devices used outdoors.

The RPS3010-P fully complies with the IEEE802.3af and IEEE802.3at Power over Ethernet standards, and all PoE ports can withstand a maximum surge of 6KV, providing up to 135W of power to end devices. Based on weak Layer 3 functionality, it can be used as an outdoor core switch. It provides full management capabilities, controllable via Web interface, CLI, Telnet, etc., for various network functions. Making your outdoor solutions more "secure", "easy", and "smart".

Product Features

● IEEE802.3, IEEE 802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.3af IEEE802.3at standards

● Provides 8 10/100/1000 Base-TX ports + 2 1G SFP ports

● Supports 8 PoE ports

● 44~57VDC voltage input

● Maximum 135W output

● 20Gbps high backplane bandwidth

● Supports MLD Snooping

● Supports IP/Extend IP/MAC IP/ARP ACL protocols

● Supports IGMP snooping for multimedia applications

● Supports port mirroring and bandwidth control

● Supports IEEE802.3x flow control

● Supports port-based VLAN/802.1Q Tag VLAN

● Supports IEEE802.3ad port aggregation

● Supports IEEE802.1d/802.1w/802.1s spanning tree protocol

● Supports IEEE 802.1p priority service

● Supports IEEE 802.1x user authentication

● Supports broadcast storm filtering

● Supports DHCP client, DHCP relay, DHCP server, DHCP snooping

● Supports static routing, policy routing, RIP, OSPF, VRRP

● Supports system event logging

● Supports command-line interface management

● Manageable via Web/SNMP/SSH/Telnet/Console

● Outdoor weatherproof enclosure

Attributes
Network Port	8 x 10/100/1000 Mbps RJ45 Electric Port 2 x 1Gbps SFP Optical Port
Management Interface	Console Port
LED Indicator Light	Power Supply 'Link/Act, PoE' LED Indicator Light
Performance
Switching MAC Capacity	20 Gbps
Packet Forwarding Rate	14.9 Mpps
Forwarding Mode	Store and Forward
Forwarding Cache	12 Mbit
CPU	2G Mbit
Memory	512 Mbit
MAC Capacity	16K
Maximum Jumbo Frame Size	16K
ACL Table	512
VLAN Quantity	4K
VLAN Interface	32
Routing Host	512
Routing Table Entry	64
Port Queue	8
PoE Power Budget	120W
Physical Characteristics
Product Dimensions	29 5 x 20 6 x 50 mm
Product Weight	1.5KG
Operating Temperature	0 to 40 ℃
Storage Temperature	-2 0 to 70 ℃
Operating Humidity	5 to 95% Non-condensing
Input Voltage	44~57VDC
Maximum Power Consumption	Including POE Output 135 W Excluding PoE Output : 10W
Certification	FCC Part 15 Class A, CE, LVD
ROHS	ROHS 2.0
Po E
PoE Port	Ports 1-8
PoE Standard	IEEE802.3af, IEEE802.3at
Maximum per port PoE Power	30W
PoE Voltage	44~57 VDC ( Depends on input voltage )
PoE Pin Pin	V- (RJ45 Pin1,2), V+ (RJ45 Pin 3,6)
PoE Management	Port-based PoE Status view and control
Port Configuration
Enable and Disable	Supports control enable and disable
Auto-negotiation	Supports forced port mode and speed
Flow Control	Supports IEEE802.3x Full Duplex Supports half-duplex backpressure
Storm Control	Supports broadcast, multicast and DLF Packet Rate Limiting
Port Mirroring	Supports many-to-one mirroring
Port Rate Limiting	Supports port input and output rate limiting
Link Aggregation	Supports manual link aggregation Supports LACP Maximum 8 maximum aggregation groups, each aggregation group contains a maximum of 8 ports
Convergence Strategy	Supports Source MAC / Destination MAC / Source Destination MAC Supports source IP / Destination IP / Source Destination IP
Port Protection	Each port can be configured as a protected port isolated from each other
MAC Configuration
MAC Address Table Management	Supports
Transmission Mode	Support IVL transfer mode
Static MAC Address	Supports
MAC Address Binding	Supports
MAC Address Filtering	Supports
MAC Learning Control	Supports limiting the MAC number of addresses learned by each port
VLAN Configuration
Based on 802.1 Q of VLAN	Supports
Based on MAC of VLAN	Supports
Based on IP of VLAN	Supports
Protocol-based VLAN	Supports
Guest VLAN	Supports
Private VLAN	Supports
Ring Network
Spanning Tree Protocol	Support STP/RSTP/MSTP
BPDU Protection	Supports
BPDU Filtering	Supports
Port Loop Detection	Supports
EAPS Protocol	Supports RFC3619
LLDP Protocol	Supports LLDP and LLDP-MED
UDLD Protocol	Fully compatible CISCO of UDLD Protocol
L3 Routing
Static ARP & Dynamic ARP	Supports
Static Routing	Supports
Policy Routing	Supports
RIP	Supports RIP v1/v2
OSPF	Supports OSPF v2
VRRP	Supports
Multicast
Static Multicast MAC Address	Supports
IGMP SNOOPING	Supports
MVR	Supports
GMRP	Supports
ACL
Standard-based IP of ACL	Supports
Extended-based IP of ACL	Supports
Based on MAC IP	Supports
Based on MAC ARP of ACL	Supports
Time-based ACL	Supports
Port Filtering	Supports
QOS
Scheduling Mode	Supports WRR , SP, WFQ
Port Priority Based	Supports
Based on 802.1p Priority	Supports
Based on DSCP(DiffServ) Priority	Supports
DHCP
DHCP Client	Supports
DHCP Relay	Supports
DHCP Server	Supports
DHCP option 82	Supports
DHCP Snooping	Supports
Security
Management Security	Supports starting and ending telnet, web and snmp services Supports telnet, web and snmp service binding Definition Standard IP ACL Supports control TELNET Number of users
CPU Protection	Switch self-protection, prohibiting traffic attacks
IP-MAC Address Binding	Supports static configuration IP ， MAC and binding between ports
AAA	Supports 802.1x Protocol Supports RADIUS Protocol Supports RADIUS Server Authentication, Authorization, and Accounting Supports based on MAC of 802.1X Authentication. Supports 802.1x Guest VLAN
DHCP SNOOPING	Supports dynamic ARP binding to prevent ARP spoofing Supports dynamic IP ， MAC Port Binding Supports fixed port connections DHCP server, preventing private connections DHCP Server
Prevent ARP spoofing	Supports manually configuring based on MAC ARP of ACL rules to prevent ARP spoofing Supports DHCP SNOOPING function, when DHCP getting IP address, the switch dynamically binds ARP and port to prevent ARP spoofing
Management Features
CLI Management	Supports serial port management Supports TELNET Management Supports SSH Management
WEB Management	Supports
SNMP Management	Supports SNMP Protocol Supports SNMP TRAP Supports standard and proprietary MIB
User Management	Supports multi-user management
Display CPU Utilization	Supports
Display RAM Utilization	Supports
Log Management	Supports
Configuration Download / Upload	Supports
Firmware Upgrade	Supports
Time Management	Supports local timer management Supports SNTP Protocol to obtain clock
Debugging Tools
PING	Supports
Route Tracing	Supports
TELNET Client	Supports
Packaging
PoE Switch	1pcs
User Manual	1pcs
Power Adapter	1pcs

Switch Model
RPS3012-8P-135	8 GE + 2x1G SFP Outdoor weatherproof three-layer 8 Port Management POE Switch (1 35 W)
SFP Module
GSFP-RJ45	1000M SFP Module ', RJ45 Port
GSFP-M-LC-R5	1000M SFP Module , Multi-mode ', 500M, 850nm, LC
GSFP- S -LC-20	1000M SFP Module , Single-mode , 2 0km, 1310nm , LC
GSFP- S -LC-40	1000M SFP Module , Single-mode ', 40km, 1310nm, LC
GSFP- S -LC-80	1000M SFP , Single-mode ', 80km, 1550nm, LC